transformer
25 KVA Single Phase Pole Mounted Transformer
Pole Mounted Distribution Transformers are used in the Power Grid to step down or step up voltage depending on the specific need. Pole Mounted Transformers are typically mounted on a power pole or ...
DESCRIPTION
Pole Mounted Distribution Transformers are used in the Power Grid to step down or step up voltage depending on the specific need. Pole Mounted Transformers are typically mounted on a power pole or a platform. These transformers usually range from 5 KVA up to 500 KVA and have a primary voltage between 2400 – 34500 volts. Secondary voltages typically range between 120 – 7200 volts.
The 25 kVA single-phase pole-mounted transformer employs high-quality aluminum winding material for both its high and low-voltage sections, ensuring superior performance and reliability. With an impedance value of 2%, it features a Vector group of Ii0 and polarity that is Subtractive, enhancing its efficiency.
Pole Mounted transformers are used in a wide range of industries, including; power generation, utility, industrial, mining, oil & gas, as well as government.
single phase pole mounted transformer
25kVA pole mounted transformer specifications
| Power rating | 25kVA |
| HV Voltage | 13800V |
| LV Voltage | 120/240V |
| HV BIL | 95kV |
| LV BIL | 30kV |
| Length | 520mm |
| Width | 620mm |
| Height | 990mm |
| Polarity | Additive |
| HV/LV Winding | Copper |
| No load loss | 98w |
| On load loss | 295w |
| Total loss | 393w |
| Frequency | 60Hz |
| Vectorgroup | Ii6 |
| Color | Grey |
| Tank & Accesories | 125kg |
| Oil weight | 50kg |
| Total weight | 225kg |
| Impedance | 1.98% |
With copper windings at its core, this transformer guarantees excellent performance and reliability. It operates at 50 Hz and features an Ii0 vector set with additional polarity, ensuring seamless integration into various power systems.
Single Pole Mounted Transformer Feature
- Meeting IEEE, IEC, and various national standards
- Automatic pressure relief valve
- Non-PCB insulation oil
- Electrostatic powder painting for corrosion prevention
- “Recessed bottom” design
- Waterproof for high-voltage or low-voltage bushing mounting
